Home > Produkt-Liste > Elektronische DC-Last > 1200V DC Elektronische Last > 1200V 11000W programmierbare E-Last
  • Produktbeschreibung
Overview
Produkteigenschaften

ModellEL1200VDC11000W

MarkeAPM.

HerkunftsortChina

Input Voltage0~1200V

Input Current0~400A

Input Power0~11000W

Voltage Readback Accuracy0.015%+0.015%F.S.

Current Readback Accuracy0.04%+0.06%F.S.

Power Readback Accuracy0.1%+0.1%F.S.

Height7U

Warranty2 years

InterfaceRS232/RS485/USB(Standard)

Lieferfähigkeit & Zusatzinformationen

VerpakungHolzkiste

Produktivitätother

TransportLand,Ocean,Air

Ort Von ZukunftCHINA

Unterstützung überother

Zertifikate ISO9001/CE/ROHS/CSA/UL

HS-Code8543709990

HafenDHL

ZahlungsartT/T

IncotermEXW

Verpackung & Lieferung
Verkaufseinheiten:
Piece/Pieces
Pakettyp:
Holzkiste
Bildbeispiel:

APM techonogies programmable DC electr onic load 1200V 11000W supports sine wave loading function which allows to load sine wave, can be used for impedance analysis test of fuel cells.

This Dc Electronic Load Tester provides a unique constant current dynamic sweep to use frequency conversion to find out the UUT voltage of worst case.

200V DC Electronic Load and 600V DC Electronic Load for lower voltage options.Two or more loads can be connected in master-slave parallel mode to provide more power or current capacity to make Dc Electronic Load System with 200V DC Electronic Load System,600V DC Electronic Load System,1200V DC Electronic Load System.


Functions & Advantages:

Flippable Front Panel and Color Touch Screen
This series programmable DC electronic load is equipped with flippable front panel for 4U, 7U, 10U and 13U height models. Together with a large color touch screen provides simple and fast operation for customer. Real-time update of display input data, status and graphical display makes it more intuitive.


Multiple Operating Mode

This series programmable DC electronic load provides four kinds of basic operating mode including CV (constant voltage), CC (constant current), CR (constant resistance), CP (constant power), to satisfy a wide range of test requirements.


Adjustable CV Loop Speed
This series electronic load supports CV loop response speed setting to FAST, NORMAL or SLOW to satisfy different test requirements. This function may avoid the inaccurate measurement or testing fail caused by the response speed mismatch between the load and the power supply, which is possible to improve test efficiency and reduce costs on the equipments, time and expenses.


Dynamische Belastung

This series electronic load can be switched quickly between different values in the same operating mode, including CC dynamic mode, CV dynamic mode, CR dynamic mode and CP dynamic mode, CC/CR high speed dynamic mode up to 50kHz. This function is suitable for transient test of power supply, test of battery protection characteristic and battery pulse charging etc. Dynamic mode test has continuous mode, pulse mode and toggle mode.


Sine Wave Dynamic Load
This series electronic load supports sine wave loading function which allows to load sine wave,can be used for impedance analysis test of fuel cells.


Dynamic Frequency Sweep Function

This series electronic load provides a unique constant current dynamic sweep to use frequency conversion to find out the UUT voltage of worst case.
This CC dynamic sweep allows the user to edit two load levels, start frequency, end frequency, step frequency, dwell etc.
The sampling rate is up to 500kHz, which make it can simulate different loading conditions for most test requirements.


Battery Discharge Test
This series electronic load has battery discharge function, and can perform discharge test under CC, CR or CP mode. The DC load can set end voltage or time to stop loading correctly and make sure the battery is not damaged due to over discharge. The user can set stop conditions, whenever met any condition, the load will stop loading and counting automatically. During the test, users can observe battery's voltage, discharging time and already-discharged-capacity.

Automatikmodus

This mode allows automatically switches among CV, CR, CC and CP modes. It is suitable for lithium ion battery charger testing to get a complete VI charging curve. This flexible auto mode also enormously improve test efficiency.


OCP/OPP Tests

This series electronic load provides OCP and OPP modes are mainly applied in over-current and over-power points tests. After the testing the load can automatically judge the test result according to the set specifications. Take OPP testing as example, the OPP provides ramped up power for the load to test the UUT voltage whether has reached trigger voltage level and to judge if the protection is acting normally or not.


List Mode

The list function allows user to create waveform files to automatically simulate various complicated loading conditions. The list mode has 10 files, by editing operating mode (including CC, CV, CR,CP, Short and ON/OFF), repeat times, total steps, setting value of each step and step time etc. This function can be applied to the testing of output characteristic and stability for power supply.


Master/Slave Control

This series electronic load provides the user with Master/slave mode, supports parallel connection under different power and same voltage and dynamically synchronized. In Master/slave mode, the user only need to control the master one, the load current will be automatically calculated and downloaded to the slave loads. The Master/slave mode greatly simplifies the operation when increased power is needed.


External Control and Current/Voltage Monitoring

This series electronic load has analog control interface to control the input voltage and current. The external signal 0 to 10V controls the sinking condition from 0 to full scale. Using the external control mode can simulate arbitrary waveform which is ideal for industrial control requirement.
The 0 to 10V analog output signal of V-MON/I-MON terminals represent input to which the terminals belong from 0 to full range.
An external voltmeter or oscilloscope can be connected to display input voltage/current change.


Produktgruppe : Elektronische DC-Last > 1200V DC Elektronische Last

Firmenüberblick
APM Technologies (Dongguan) Co., Ltd. ist ein High-Tech-Unternehmen, das auf die Forschung und Entwicklung (F & E), die Produktion und Verteilung des Marine Smart Systems (MSS), PV Solar-Wechselrichter, programierbares Stromversorgung , automatisiertes Testsystem und automatisiert spezialisiert ist. Fertigungsausrüstung. Unser Unternehmen verfügt über vollständige Systeme in der Produktplanung, Forschung und Entwicklung, Laborexperiment, Tests und Qualitätskontrolle. Darüber hinaus haben wir die ISO 9001 -Standardzertifizierungen bestanden. Das F & E -Team von APM Technologies besteht aus mehr als 100 Personal, die Ph.D. und Master -Abschlussinhaber sowie hochrangige Experten in den entsprechenden Branchen. Durch die Zusammenarbeit mit einer Reihe von inländischen und internationalen Forschungsteams und der Aufrechterhaltung einer langfristigen strategischen Zusammenarbeit mit führenden Hochschulen und Universitäten kann unser Unternehmen sicherstellen, dass Produkte und Dienstleistungen in der Branche führen. Durch die Anwendung unserer professionellen Techniken und Technologien, um kontinuierlich innovativ zu sein und durchzubrechen, hat sich APM -Technologien bisher für eine Reihe von Erfindungspatenten beantragt und bereits eine Reihe von Versorgungspatenten, Designpatenten, Software -Urheberrechten und andere verwandte Patente erhalten. Unsere Produkte haben die CE, VDE, SAA, CQC, CSA, FCC usw. überschritten. APM -Technologien von Anfang an und von der Vergangenheit bis zur Zukunft haben immer das Unternehmen Spirit des "ständigen Strebens nach Exzellenz" aufrechterhalten, um unseren Kunden die "24 Stunden am Tag der fortgesetzten Dienstleistungen" zu bieten.
Firmenfotos
Produktionszertifizierung
Herunterladen
Home > Produkt-Liste > Elektronische DC-Last > 1200V DC Elektronische Last > 1200V 11000W programmierbare E-Last
Mail an Lieferanten
  • *Fach:
  • *Zu:
    Ms. Emily Cui
  • *E-Mail-Adresse:
  • *Nachrichten:
    Ihre Nachrichten muss zwischen 20-8000 Zeichen sein
Anfrage versenden
*
*

Zuhause

Product

Phone

Über uns

Anfrage

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

senden